The order packaging of granular or powder raw materials has high precision and can be controlled within 0.1%; high stability and extremely low failure rate. It can be sealed with a sewing machine or a vacuum heat sealing machine.

The anti-bridging measures of the loss-in-weight measurement system are mainly divided into two parts: the replenishment bin system and the loss-in-weight scale itself.
The anti-bridging measures of the feeding bin mainly include: adding an activation hopper at the bottom of the feeding bin, adding a vertical stirring device in the middle of the feeding bin, adding an air blowing device or vibrating air hammer at the bottom of the feeding bin, choosing a suitable size feeding valve and The type of valve, the design of the feeding angle of the silo should be reasonable, the length and angle of the excessive pipe of the feeding port under the valve should be reasonable, and the feeding port can be coated with Teflon to prevent sticking and other measures.

From the front-end small material feeding station, ton bag unloading station, vacuum conveying system, feeding system, weight loss measurement system; to the back-end homogenizing system, packaging system, etc., we can provide complete solutions and the best quality products , best service.

The application of the weight loss scale needs to use 2 layers of platforms, the first layer is for the weight loss scale, and the second layer is for the replenishment bin; when the twin-screw extruder is working, there will be a lot of vibration, when people put raw materials on the steel platform, and When walking back and forth, there will be a large vibration on the steel platform. This vibration will be transmitted to the position of the weightless scale, which will have a great impact on the accuracy of the weightless scale. In order to reduce the interference, the main measures are:
1. The platform should be as strong as possible, and the selected steel type should be larger.
2. A separate piece of steel plate is required for the position where the weightlessness scale is placed. The thickness of the steel plate should be at least about 10-14mm, and the steel plate should be separated from the surrounding pattern plate by a gap of about 10mm.
3. It is best to make the second-floor platform of the replenishment silo into a cement platform or a large platform.
4. Try to use the way of vacuum conveying and feeding to reduce human interference factors.

The application of the weight loss scale needs to use 2 layers of platforms, the first layer is for the weight loss scale, and the second layer is for the replenishment bin; when the twin-screw extruder is working, there will be a lot of vibration, when people put raw materials on the steel platform, and When walking back and forth, there will be a large vibration on the steel platform. This vibration will be transmitted to the position of the weightless scale, which will have a great impact on the accuracy of the weightless scale. In order to reduce the interference, the main measures are:
1. The platform should be as strong as possible, and the selected steel type should be larger.
2. A separate piece of steel plate is required for the position where the weightlessness scale is placed. The thickness of the steel plate should be at least about 10-14mm, and the steel plate should be separated from the surrounding pattern plate by a gap of about 10mm.
3. It is best to make the second-floor platform of the replenishment silo into a cement platform or a large platform.
4. Try to use the way of vacuum conveying and feeding to reduce human interference factors.